Blade 350 QX BNF Firmware 2.0 with SAFE Technology

Product Code: BLH7880

Manufacturer: Blade

$529.00

350 QX BNF Firmware 2.0 with SAFE Technology

Firmware 2.0 Features
 
The Blade® 350 QX quadcopter has been updated with Firmware 2.0 to provide the best experience. This firmware update facilitates a new flight mode configuration as well as a refined starting procedure. Additionally, the firmware update improves GPS and compass performance during preflight and flight.
 
Refined Start Procedures
There are now two options to start the motors:
 
Pilots can now move both sticks into the bottom inside corners to start the craft.
Left-right-center procedure remains active as well.
 
New Flight Mode Configuration
 
Smart Mode: Stick Relativity, SAFE® Circle feature, Altitude and GPS Lock and Self-Leveling
AP Mode: Altitude and GPS Lock with soft Self-Leveling
Stability Mode: Self-Leveling, GPS Lock
*Agility Mode: Only available with Spektrum™ DX6i or higher transmitters (Endpoint adjustment is necessary)
 
Compass and GPS Error Detection
The Firmware 2.0 update prevents GPS and compass errors from causing adverse flight conditions. The status LED blinks orange if the compass senses a magnet or metal object nearby.
 
New Charger
This version comes with a new 12V DC accessory charger that plugs into a 12V auxiliary power port, like the one found in your car. This charger functions exactly the same as the original charger but has a 12V DC accessory power connector instead of DC alligator clips.


 
 

THE GOPRO® COMPATIBLE BLADE® 350 QX
 
Taking the knowledge of heli design to the aerial video market with the Blade® 350 QX, this highly capable quadcopter features dynamic flight modes that enable stable video capture from an included GoPro® compatible camera mount (camera sold separately). With the 350 QX, novices and experts alike can get involved in this exciting hobby with Ready-to-Fly and Bind-N-Fly® models available upon release.

Engineered with SAFE™ Technology

Smart Mode
While in Smart Mode, SAFE technology engages the innovative SAFE Circle™ which prevents the 350 QX from flying too close to its pilot. When in a hover, GPS and altimeter sensors keep the quadcopter in a consistent stable position. The Stick Relativity feature allows the 350 QX to follow the directional inputs from a pilot regardless of the orientation of the quadcopter.

Stability Mode
In Stability Mode, SAFE technology limits the flight envelope of the 350 QX and enables self-leveling characteristics for consistent level flight even when pilot input is abruptly removed from the control sticks. GPS Position Hold can be enabled or disabled by a pilot while in Stability mode.

Agility Mode
The 350 QX utilizes AS3X flight characteristics to deliver a robust flight experience. While flying in Agility Mode, the 350 QX can perform aerobatic maneuvers with extreme stability thanks to SAFE technology.

GPS & Altimeter Technology
GPS and altimeter sensors in the 350 QX provide the ability to remain in a specific position for stable aerial footage and peace of mind.

SAFE Circle™
Never worry about flying too close to yourself with this invisible pilot barrier (Smart Mode only).

Stick Relativity
Move the cyclic stick on the transmitter right or left, and the 350 QX will move right or left relative to the pilot regardless of which way it's pointing.

Return Home
During flight, with the flip of a switch and without any stick input from the pilot, the 350 QX will automatically return home to where its motors were started.

GoPro® Compatible
Thanks to four 1100Kv brushless motors and ample power from a 3S 2200mAh 30C Li-Po battery, the 350 QX has more than enough power to carry a GoPro® camera*.
An anti-vibration camera mount** is included with purchase.
*Camera not included.
**Designed for use with GOPRO® products. GOPRO® is a registered trademark of Woodman Labs, Inc. in the United States and other countries.

Needed To Complete

- A 5+ channel DSM2- or DSMX-compatible transmitter *
-  Power supply required (Car battery or AC power supply) for included DC Charger

Specifications

Charger: 2-3S LiPo DC Balancing Charger (included)
Main Rotor Diameter: 580mm (22.8 in)
Main Rotor Blade Length: 210mm (8.27 in)
Main Motor Size: Brushless, 1100Kv
Battery: 11.1V 3S 2200mAh 30C LiPo
Length: 465mm (18.3 in)
Width: 465mm (18.3 in)
Height: 138mm (5.43 in)
Flying Weight: 680 g (24 oz)
Approximate Flight Time: 5–14 minutes
Is Assembly Required: No
Rotor Type: Quad-Copter
Experience Level: Intermediate
Completion Level: Bind-N-Fly
Recommended Environment: Indoor/Outdoor