Phoenix 45 amp Brushless ESC

With a surge current of 60 amps, the Phoenix-45 is well suited for warmliners, small hotliners, and even some 40 size glow conversion projects. Matched up with Hacker B50 and C50 motors, medium and large AXI motors, or 36mm Feigao motors, the Phoenix-45 puts a lot of power at your fingertips, and all in a very light and compact package.

With the same programmable features of it's smaller cousins, the Phoenix-45 can be set for helicopter installations (including those with collective pitch) or airplanes. Additionally, for competition flyers the Phoenix-45 features an adjustable switching rate for optimum efficiency.

Why use a poor quality no name brand when you can fly with the confidence of a Castle Creations ESC!

User programmable features include:

Low-voltage cutoff - 4V, 5V, 6V, 7.2V, 9V, 12V
Over-Current Protection - 5 settings
Brake Type - 5 settings
Throttle Range - fixed/self-adjusting/governor
Timing Advance - 3 choices
Cutoff Type - hard or soft
Switching Frequency - 3 choices

All Castle Creations speed controls feature:
 
Battery Eliminator Circuit (BEC): eliminates receiver battery
Safe "Power On"
Microprocessor Controlled
Tough surface mount construction
Audible Arming Signal
Auto Motor cut-off with reset
Low torque "Soft Start": protects gear boxes and belt drives from shock
Smooth reverse exponential throttle
Self-calibrating endpoints: maximizes usable stick travel
Auto shut-down when signal is lost
Simple setup: no complicated switches
or wiring
 
Specifications:

Volts w/BEC 12.6 max
Volts NO BEC 19.2 max
Lipo Cells w/BEC 3S max
Lipo Cells NO BEC 4S max
NiCad or NiMh Cells w/BEC 12 max
NiCad or NiMh Cells NO BEC 16 max
Continuous 45 amps
Switching Rate Programmable
(11, 22, or 41 khz)
Resistance 0.0026 ohms
Brake Yes
Reversible Yes - change any two wires
Low Voltage
Cut-off Programmable
Size (mm) 24.1 x 43.7 x 10.6mm
Weight  30 grams
Connector Type Universal