Rebel 70 Sport ARF

The Rebel 70 was conceived with the sport pilot in mind. You asked for quality and performance, and a great price. eRC is here for you with a great looking jet that is both fun and exhilarating to fly. The Rebel 70 is built from tough EPO foam and comes with the decals pre-applied so you can get right to the assembly. Have your battery charged when you open the box because it will only take 30 minutes or less to get your Rebel ready to fly. Only two parts require glue, everything else is assembled with screws. It comes with five 9g servos installed, a 70mm fan with a 3000Kv outrunner motor, and a 45A ESC.

All you need to provide is a 4-cell 2200mAH LiPo and minimum 4-channel radio system. The battery area can accommodate up to a 3300mAH battery with the removal of a plastic tab in the tray. The fixed tricycle landing gear includes nose wheel steering and can be removed to reduce drag for maximum speed. Flights can be mild or wild depending on your control settings. Rolls are crisp and stop right on command. The large rudder enables super slow rolls, point rolls, and knife-edge flight.

Specifications:

Wingspan: 920mm (36-1/8 in.)
Length: 1100mm (43-1/8 in.)
Flying Weight: 1043g (37 oz.)
70mm ducted fan unit
3000Kv outrunner brushless motor
45A speed control with BEC and genuine Deans Ultra connector
Five 9 gram servos
Removable fixed landing gear with nose wheel steering
Pre-decorated EPO airframe
Pilot figure
Large Rudder for knife-edge flight
Large battery area for 2200-3300mAh size LiPo packs

Please note due to the size of this Kit it must be sent by courier. Please e-mail us for a quote.