Cessna 150 Aerobat 250 ARF
The Cessna 150, while designed over 50 years ago, to this day has a personality and spirit all its own. Considered still tame enough for training, the Aerobat version appealed to casual pilots that needed a jolt to become even more proficient. This 250-size ARF version is for RC pilots wanting the thrill of basic aerobatics in a small yet detailed package. This clever, all-wood model remarkably maintains the subtle curves and character of the original aircraft, yet is distinctively tricked out with a checker-scheme that honors the character of the Aerobat.
Key Features
Authentic scale outline and lightweight UltraCote® ParkLite™ trim scheme
Balsa construction with fiberglass cowl and wheel pants
Laser-cut engineered to be as light as possible
Magnetically secured plug-in wings and cowl
Clear front, rear, side and skylight windows
Pre-hinged ailerons and rudder controls
Easily assembles in a single evening
Easy access hatch with spring-loaded latch
Quick release struts
E-flite aluminum spinner available separately (EFLSP100)
Recommended for use with the New Park 280 Motor (EFLM1140)
Recommended for use with the New 3.5-Gram DS35 Digital Super Sub-Micro Servo (EFLRDS35)
Specifications
Wingspan: 962mm (37.9 in)
Overall Length: 690mm (27.2 in)
Wing Area: 12.65 sq dm (196 sq in)
Flying Weight: 340-388 g (12.0-13.7 oz)
Motor Size: 250- to 280-size Brushless Outrunner
Radio: 4 channels minimum
Servos: 4 super sub-micro servos required
Trim Scheme Colors: White, Orange, and True Red
CG (centre of gravity): 35-43mm (1-3/8 to 1-11/16 in) back from the leading of wing at wing root
Prop Size: 7 x 3.5
Spinner Size: 1.00 in
Speed Control : 10-Amp
Recommended Battery: 2S 430mAh - 3S 450mAh Li-Po
Control Throw (Ailerons): Low: 7mm up/down; High: 9mm up/down
Control Throw (Elevator): Low: 12mm up/down; High: 16mm up/down
Control Throw (Rudder): Low: 11mm right/left; High: 15mm right/left
Minimum Age Recommendation: 14 years
Experience Level: Intermediate
Recommended Environment: Indoor/Outdoor
Assembly Time: 5-7 Hours
Is Assembly Required: Yes
Needed to Complete
High Power Setup
Sport Setup
Recommended Electronics and Accessories
- 4+ channel Transmitter and Receiver radio system
- Four (4) sub-micro servos
- Flight Battery and compatible Charger
- Motor
- Propeller
- ESC
